Table of Contents
Advertisement
Quick Links
I N S T A L L A T I O N I N S T R U C T I O N S
Instrucciones de instalación
Installationsanleitung
Instruções de Instalação
Height Adjustable Floor to Wall Stand
Istruzioni di installazione
Installatie-instructies
Instructions d´installation
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
XFA1U
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for CHIEF XFA1U
Summary of Contents for CHIEF XFA1U
- Page 1 I N S T A L L A T I O N I N S T R U C T I O N S Instrucciones de instalación Istruzioni di installazione Installationsanleitung Installatie-instructies Instruções de Instalação Instructions d´installation Height Adjustable Floor to Wall Stand Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description XFA1U...
-
Page 2: Important Safety Instructions
AN ACCESSORY is the secondary Chief lower bracket (CPU’s, etc.) cannot exceed 20 lbs (9.07 kg). product which is attached to a primary Chief product, and may Exceeding the weight capacity may result in damage to the have a component attached or setting on it. -
Page 3: Installation Instructions
Installation Instructions XFA1U DIMENSIONS 16.00 406.4 7.87[200] MIN 31.50[800] MAX 59.64 [1515] MAX HEIGHT TO 41.98 CENTER OF DISPLAY [1066] MIN HEIGHT TO CENTER OF DISPLAY 1.50 38.1 0.40 10.2... - Page 4 XFA1U Installation Instructions LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación...
-
Page 5: Tools Required For Installation
Installation Instructions XFA1U TOOLS REQUIRED FOR INSTALLATION 7/32" (5.3mm) - wood studs 3/8" (10mm) - concrete 1/2" (deep) 1/2" (12.7mm) - steel studs 1/8” (included) 3/16” (included) PARTS H (1) [Hardware bag] HB (6) HC (6) HA (8) M4x25mm M4x20mm... -
Page 6: Assembly And Installation
Floor" Section and attach to floor before securing to the wall. IMPORTANT ! : The XFA1U does NOT need to be attached to the floor as well as the wall, but it MUST be attached to the wall. Do NOT only attach it to the floor... -
Page 7: Site Requirements
Installation Instructions XFA1U Site Requirements 16" (on center) Studs Short Throw Mount Installation Location (Must be centered over two studs) If back side of wall is unfinished, drywall must be installed to a minimum of one stud left and right of the studs being used to install the mount. -
Page 8: Side View
XFA1U Installation Instructions Drill a 1/2" hole at the desired mounting locations. If also attaching to floor, proceed ahead to "Attaching to Floor" Section and attach to floor before securing to the Hold metal channel on anchor (R3) flat alongside plastic wall. -
Page 9: Display Installation
It is the holes. installer’s responsibility to make sure the combined weight of all accessories and components attached to the XFA1U head Select screw length: (See Figure 8) assembly up to (and including) the display does not exceed •... - Page 10 XFA1U Installation Instructions Move latches on interface uprights to the “closed” position to secure display to head assembly. (See Figure 11) WARNING: Display may be very heavy! Ensure display may be safely lifted and maneuvered as required to install on mount.
- Page 11 Installation Instructions XFA1U Component Bracket Installation (Optional) NOTE: Component bracket may be installed to either side of column. power strip (example) NOTE: Lower cover must be removed to install component bracket. See Cover Removal section for details. Loosely install two #10-24 x 3/8” Phillips head machine screws (D) through two #10 washers (F), holes in component bracket (C) and into two #10-24 square nuts (E).
-
Page 12: Cable Management
XFA1U Installation Instructions Cover Removal/Access/Re-install Cable Management NOTE: The front cover comes with four button head cap NOTE: The following cable management options may vary screws installed to provide additional security. But to based on type of display being mounted and user have quick access to the interior of the mount, these preference. - Page 13 Installation Instructions XFA1U Route cables from display through inside of column assembly attaching at cable management attachment height adjustment knob points and/or accessory bracket using cable ties (K) or high point cable clips (T) as desired. (See Figure 20) stability knob x 2...
- Page 14 XFA1U Installation Instructions Pitch Adjustment WARNING: Removing pitch adjustment screws when the display is installed will result in the display falling from the mount! Do NOT remove pitch adjustment screws completely while the display is installed to the mount! Loosen two stability knobs on either side of head assembly.
- Page 15 Installation Instructions XFA1U...
- Page 16 Europe A Franklinstraat 14, 6003 DK Weert, Netherlands P +31 (0) 495 580 852 F +31 (0) 495 580 845 Chief, a products division of Asia Pacific A Office No. 918 on 9/F, Shatin Galleria Milestone AV Technologies 18-24 Shan Mei Street...
Need help?
Do you have a question about the XFA1U and is the answer not in the manual?
Questions and answers