Plp Parameters (Only For Dvb-T2) - Promax MO-480 User'smanual

5.2.2.4

PLP Parameters (only for DVB-T2)

Figure 15.
It shows the parameters for each Physical Pipe Layers.
In case of mode a / b T2-MI, selecting the desired PLP with PLP select it shows
the parameters for that PLP.
In case of mode a, TS, then there will be only one PLP and parameters must be
set by the user.
User can select the layer to watch on PLP select menu. It will show the
parameters associated with the layer selected.
September 2016 5-19