5.2.6
Testing
It allows you to test the signal output by changing different parameters. Select
the type of test from the dropdown menu and press "Set".
► DVB-T Output Testing:
Normal DVB-T signal.
Blank carriers (selecting start and stop carrier index).
CBER injection (selecting CBER).
VBER injection (selecting VBER).
Single RMS Tone.
► DVB-T2 Output Testing:
Normal DVB-T2 signal.
Single RMS Tone.
Blank carriers (selecting start and stop carrier index).
Null P1 preamble.
September 2016
Figure 21. Testing screen for DVB-T
Figure 22. Testing screen for DVB-T2
5-25