5.2
Menu Options
The menu bar appears at the top of the screen with all the available options. This
menu bar stays in all the screens, so it is always possible to access it.
Options are:
5.2.1
5.2.2
5.2.2.1 Input
5.2.2.2 Modulation
5.2.2.3 Network parameters
5.2.2.4 PLP parameters
5.2.2.5 Output
5.2.4
5.2.5
5.2.6
5.2.7
5.2.8
At the bottom of all screens there is some information about the status of the
equipment.
Information shown is:
Input
Primary:
Secondary:
Frequency Network
If shows if it is SFN (single-frequency network) or MFN (multiple-frequency
network).
5-10
Figure 5. Top screen.
Monitoring
Configuration
System
Log
Admin
Testing
About
It shows the type of signal at the primary.
It shows the type of signal at the secondary.
Figure 6.
September 2016