Table of Contents
Advertisement
Output
It shows the frequency of the signal at the output
Log
It shows information about the log register.
Next to each parameter there is a point in a colour, which refers to the physical
LED.
If this point is in RED, it means that some error has ocurred and is working
badly.
If this point is in GREEN, it means it is working properly.
If this point is in GRAY, it means that is not working or there is no signal.
The following sections describe in detail each one of the screens.
5.2.1
Monitoring
September 2016
Figure 7. Monitoring screen for DVB-T
5-11
Advertisement
Table of Contents
