Table of Contents
Advertisement
3.1.2
Rear panel description
Figure 2. Rear panel.
RF output, 50 Ω, female N-type connector.
10 MHz reference output, female SMA.
ASI Sample output, female SMA.
ASI A input, 75 Ω, female BNC.
DVB-ASI input number 1.
ASI B input, 75 Ω, female BNC.
DVB-ASI input number 2.
1PPS GPS input, 50 Ω or high impedance, female SMA.
10 MHz GPS input, 50 Ω or high impedance, female SMA.
IP DATA, input for MPEG2 TS over IP, 1 Gigabit ethernet RJ45
connector.
IP CONTROL, input for web control software, 100 Mbps ethernet, RJ45
connector.
Reset IP button.
If keeping pressed for 10 or more seconds it changes the current IP
address to the default IP address: 192.168.42.30.
AC voltage connector.
Supplies power to the equipment.
Mains switch.
Switch on or off the power supply.
September 2016
3-5
Advertisement
Table of Contents
