Thermostat Configuration
Testing the thermostat
Following the thermostat configuration, test if the thermostat is controlling
the HVAC unit.
Press the "Power" button to turn the thermostat ON;
Press the "Down" button to change the temperature set point below
the current room temperature to confirm that the thermostat
initiates air conditioning.
Press the "Up" button to change the temperature set point above
the current room temperature to confirm that the thermostat
initiates heating.
Change the fan speed by touching the "Fan" button to test if the
thermostat is controlling the fan speed.
www.myamtex.com
18
•
800-650-3360
Custom Energy Savings Settings
If you don't want to use the one of the energy saving presets, you can
enter custom energy savings settings.
Accessing the Thermostat Settings
Press and hold the "Configuration" button until the first thermostat
settings screen appears.
The thermostat must be turned on to access the thermostat settings.
CONFIGURATION BUTTON
NOTE: You can access Thermostat
Configuration settings at any time by
pressing the "Configuration" button.
NOTE: If the thermostat is connected to a network, the equipment
and the energy saving settings configured on the thermostat will be
ignored and the settings configured online will be applied.
Use the "Up" and "Down" buttons to change the setting;
Press the "F/C" button to advance to the next setting;
Press the "Fan" button to return to the previous setting;
Press the "Power" button to save and exit thermostat settings;
www.myamtex.com
•
800-650-3360
19