Configuring The Equipment Settings - Reversing Valve; Configuring The Energy Saving Settings - Verdant VX Series Installation Manuals

Thermostat Configuration
Configuring the Equipment Settings - Reversing Valve
REVERSING VALVE
Use the "Up" and "Down" buttons to change the Reversing Valve
setting by changing the third digit;
0
OB contact is energized to cool;
1 *
OB contact is energized to heat;
Refer to the HVAC unit documentation to determine the
correct OB VALVE setting.
If incorrect OB VALVE Setting is selected, the HVAC unit will
turn on the heating when air conditioning is requested and
turn on the air conditioning when heating is requested;
Press the "Fan" button to advance to the next setting;
Press the "F/C" button to advance to the next menu;
*
Indicates default setting;
www.myamtex.com
16
•
800-650-3360
Thermostat Configuration
Configuring the Energy Saving Settings
Use the "Up" and "Down" buttons to select the Energy Saving preset:
E-0*
Energy Savings Off - No Temperature Setback;
E-1
Lowest Energy Savings;
E-2
Lower Energy Savings;
E-3
Standard Energy Savings;
E-4
Higher Energy Savings;
E-5
Highest Energy Savings;
Refer to the APPENDIX 1 for Energy Saving Preset details.
E-C
Indicates "Custom Energy Savings Settings" in case the active
thermostat savings settings differ from any Energy Saving preset;
For details, refer to the "Custom Energy Savings Settings" section;
Press the "Power" button to save the Thermostat Configuration and
start using the thermostat;
*
Indicates default setting;
www.myamtex.com
•
800-650-3360
17