Mounting The Thermostat To The Wall; Thermostat Configuration - Verdant VX Series Installation Manuals

Thermostat Installation
Power On the HVAC unit.

Mounting the thermostat to the wall

Remove the thermostat cover;
Use the supplied wall anchors and mounting screws to secure the
thermostat to the wall;
Insert two (2) AA-cell batteries (not supplied) into the thermostat
battery compartment;
Follow the "Thermostat Configuration" instructions;
Replace the thermostat cover and screw in the locking screw;
www.myamtex.com
10
•
800-650-3360
Thermostat Configuration
Once the thermostat is powered, thermostat configuration settings will
appear on the thermostat screen.
In order to properly operate the HVAC unit:
Set the thermostat clock;
Enter the room number;
Configure the equipment settings;
Select Energy Savings Preset;
The thermostat configuration screens have a 30-second time-out. If
no action is taken within three (30) seconds, the thermostat will exit
configuration settings.
CONFIGURATION BUTTON
NOTE: You can access Thermostat
Configuration settings at any time by
pressing the "Configuration" button.
NOTE: If the thermostat is connected to a network, the equipment
and the energy saving settings configured on the thermostat will be
ignored and the settings configured online will be applied.
www.myamtex.com
•
800-650-3360
11