Configuring The Energy Saving Settings; Testing The Thermostat - Verdant VX-TW Installation Manual

Thermostat Configuration

Configuring the Energy Saving Settings

Use the "Up" and "Down" buttons to select the Energy Saving preset:
➤
E-0*
Energy Savings Off - No Temperature Setback;
E-1
Lowest Energy Savings;
E-2
Lower Energy Savings;
E-3
Standard Energy Savings;
E-4
Higher Energy Savings;
E-5
Highest Energy Savings;
Refer to the APPENDIX 1 for Energy Saving Preset details.
E-C
Indicates "Custom Energy Savings Settings" in case the active
thermostat savings settings differ from any Energy Saving preset;
For details, refer to the "Custom Energy Savings Settings" section;
➤ Press the "Power" button to save the Thermostat Configuration and
start using the thermostat;
*
Indicates default setting;
16
Thermostat Configuration

Testing the thermostat

Following the thermostat configuration, test if the thermostat is controlling
the HVAC unit.
➤ Press the "Power" button to turn the thermostat ON;
➤ Press the "Down" button to change the temperature set point below
the current room temperature to confirm that the thermostat
initiates air conditioning.
Press the "Up" button to change the temperature set point above
➤
the current room temperature to confirm that the thermostat
initiates heating.
Change the fan speed by touching the "Fan" button to test if the
➤
thermostat is controlling the fan speed.
17