Testing The Thermostat - Verdant VX Series Installation Manual

Thermostat Configuration

Testing the thermostat

Following the thermostat configuration, test if the thermostat is controlling
the PTAC unit.
Press the "Power" button to turn the thermostat ON;
➤
Press the "Down" button to change the temperature set point below
➤
the current room temperature to confirm that the thermostat
initiates air conditioning.
Press the "Up" button to change the temperature set point above
➤
the current room temperature to confirm that the thermostat
initiates heating.
Change the fan speed by touching the "Fan" button to test if the
➤
thermostat is controlling the fan speed.
18