Checking The Direction - Epson Trume TR-MB7 User Manual

MB73 (TR-MB7) User's Guide

Checking the Direction

You can check which direction is north using the magnetic sensor built into the watch.
c
Important:
North may not be displayed correctly when the watch is placed in a strong magnetic field.
Calibrate the magnetic sensor in the following situations.
❏ When using the watch for the first time
❏ When the measurement result has deviation, or the center hand follows with the watch's rotation
❏ Improving the measurement accuracy
"Calibrating the Magnetic Sensor" on page 88
U
A
Press and release the A button several times to enter COM mode
B
Make sure you keep the watch horizontal while pressing and releasing the C button
The center hand indicates north for one minute.
c
Important:
Tilting the watch may result in incorrect measurements. Make sure you keep the watch horizontal while
measuring.
Note:
❏ While measuring, the measurement results are updated every second.
❏ When measuring is complete, the center hand points to 0 seconds, and the small second hand indicates the current
seconds.
❏ To cancel measuring before it is complete, press and release the C button.
Compass Measurements (COM)
87