Epson Trume TR-MB7 User Manual page 129

MB73 (TR-MB7) User's Guide
Trouble
The small second hand has
stopped moving
The hand moves forward
quickly when no operations
are being performed
The indicator hand points to
M when no operations are
being performed
A deviation has occurred in
the hand position or the date
Troubleshooting
When the small second hand is pointing to 15 seconds, the watch is in
"Sleep" status.
Expose the watch to light at least five seconds, or press any button.
"About the Sleep Feature" on page 40
U
When the small second hand is pointing to 45 seconds, the watch is in
"Power Save" status.
Charge the watch until the remaining battery level is 2 or higher.
When the hand starts to move, adjust the time if necessary.
"Power Save feature" on page 39
U
"Charging the watch" on page 41
U
The watch is returning from "Sleep" status to normal status.
Wait until the hand starts moving normally.
"About the Sleep Feature" on page 40
U
The watch is returning from "Power Save" status to normal status.
Wait until the hand starts moving normally.
When the hand starts moving normally, adjust the time if necessary.
"Power Save feature" on page 39
U
"Adjusting the Time" on page 45
U
Time adjustment has been performed.
Wait until the hand starts moving normally.
Hand deviations are calibrated automatically.
Wait until the hand starts moving normally.
The Automatic Time Reception feature or the leap second information
feature may be operating.
Wait until the indicator hand points to the remaining battery level.
The stopwatch may be operating.
Reset the measuring feature.
"Using the Stopwatch" on page 68
U
The watch may have been affected by magnetism or a shock.
Calibrate the deviation in the hand position.
"Correcting Misalignment of the Hands or the Date" on page 141
U
129
Causes and Solutions