Rear Panel; Power Connector; Kensington Lock - ZyXEL Communications NSW Series User Manual

3.2 Rear Panel

The following figures show the rear panels of the NSW.
Figure 23 Rear Panel: NSW100-10P
Figure 24 Rear Panel: NSW100-10
Figure 25 Rear Panel: NSW100-28P
Figure 26 Rear Panel: NSW100-28
Figure 27 Rear Panel: NSW200-28P

3.2.1 Power Connector

Note: Make sure you are using the correct power source as shown on the panel.
To connect power to the NSW, insert the female end of the power cord to the AC power receptacle on
the rear panel. Connect the other end of the supplied power cord to a power outlet. Make sure that no
objects obstruct the airflow of the fans (located on the side of the unit).
See Chapter 10 on page 55

3.2.2 Kensington Lock

The NSW200-28P comes with a Kensington Lock to secure your device. The Kensington lock is the small,
metal-reinforced, oval hole beside a padlock icon with a letter "K".
Attach a lock-and-cable from the Kensington lock to a permanent object, such as a pole, to secure the
Zyxel Device in place and prevent theft.
Chapter 3 Hardware Panels
for information on the NSW's power supply requirements.
NSW Series User's Guide
23