4.6.9
Network Stack Configuration
The items in this menu allow you to configure Ipv4 / Ipv6 PXE support.
4.6.10
Intel TXT Information
This menu displays the Intel TXT information.
4.6.11
HDD/SSD SMART Information
This menu displays the SMART information of the connected devices.
NVM Express devices do not support SMART information.
4.7
Monitor menu
The Monitor menu displays the system temperature/power status, and allows you to change
the fan settings.
Q-fan Configuration
Q-fan Tuning
Click this item to automatically detect the lowest speed and configure the minimum
duty cycle for each fan.
4.8
Boot menu
The Boot menu items allow you to change the system boot options.
Fast Boot
[Disabled]
[Enabled]
The following items appear only when you set the Fast Boot to [Enabled].
Next Boot after AC Power Loss
[Normal Boot]
[Fast Boot]
Setup Mode
[Advanced Mode] This item allows you to go to Advanced Mode of the BIOS after POST.
[EZ Mode]
4-18
Allows your system to go back to its normal boot speed.
Allows your system to accelerate the boot speed.
Returns to normal boot on the next boot after an AC power loss.
Accelerates the boot speed on the next boot after an AC power loss.
This item allows you to go to EZ Mode of the BIOS after POST.
Chapter 4: BIOS Setup