Adjustment Of Puller Feeding Amount; Speed Lever Stitch Length Adjustment; P.s.w-I Stitch Length Adjustment - SunStar SC 8200J Series User Manual

15) Adjustment of Puller Feeding Amount

- Shaft lever(PART NO.12) function can choose the
feeding of roller(quantity of motion/the stitch role of
sawing machine).
A(quantity of motion) : Large=5.2m/m, Small=2.3m/m
B(quantity of motion) : Large=4m/m, Small=2m/m
C(quantity of motion) : Large=3.3m/m, Small=1.3m/m
In case of moving the position of shaft lever(PART NO.12),
be sure that the power switch of M/C is in the OFF position and the power cord is unplugged.
Caution

16) Speed Lever Stitch Length Adjustment

- The shaft lever(PART NO.25) stitch is adjusted as the
scale is widened and it can be adjusted by changing the
setting position.
- Timing adjustment
Unfasten part no.13, shake no.25 back and forth more
than 5 times.
After the position of bearing is settled, adjust to the place
which the arrow direction is matched and fix the part no.13.
(See Decelerator Timing Adjustment of the manuals)

17) P.S.W-I Stitch Length Adjustment

* LRP Type(PART NO.66), SRP Type(PART NO.55)
Generally use by fixing to the standard position (A) part
but in case of using the stitch longer, position (B) can be used.
40
Stitch Adjustment Method
Descending from no.1
toward no.5, the stitch is
getting longer.