Srp Puller Attachment - SunStar SC 8200J Series User Manual

7) SRP Puller Attachment

A. Replace the presser foot bolt with the puller bolt.
B. Open the pulley cover of 8200 and fix the pulley of
the puller to the shaft.
C. The position of the timing is the place to adjust the
pulling of the roller.
After operate no. 6 of the manuals, adjust the wheel
movement identically.
D. Attach the puller to the body of 8200.
(Use the M8X25m/m, M6X60m/m bolt.)
6m/m TAP
TIMING
M6×60m/m
64/9 inch TAP
M8×25m/m
17