Table of Contents
Advertisement
WELDEYE
6. Buttons on the back under the sticker: BMS, RST, PWR
For resetting and troubleshooting purposes. Use a thin object, for example, a paper clip, to
press the buttons.
7. USB port
For maintenance purposes. Only USB flash storages (USB sticks) may be connected to the
port. Smart Reader configuration files and update packages are transferred to the Smart
Reader via USB port.
8. Micro USB connector
For troubleshooting purposes.
9. Ethernet connector (100 Mbit)
For troubleshooting purposes.
10. Micro SD card slot
By default, a 4 Gb memory card is connected. Smart Reader stores all welding and barcode
data on the memory card. The first time you power on Smart Reader, the SD card is formatted.
Removing the back cover
Use, for example, a coin to open the back cover lock.
Silicon cover
Silicon cover is available as an accessory, ordered separately. It protects the device from metal
dust and provides additional protection if the device, for example, falls from heights.
OPERATING MANUAL | EN
8
2.1 Parts
©
KEMPPI | 2017-12-22
Advertisement
Table of Contents
