Main Screen And Navigation - Kemppi Smart Reader Operating Manual

WELDEYE

2.2 Main screen and navigation

1. WPS pass number
To change the pass, press left/right arrow buttons.
2. Wifi icon
See Configure Smart Reader's network connection
3. Qualification deviation alert
The alert is shown if the welder has no valid qualification certificate for the seelcted WPS.
4. Identified feature
The barcode for the feature has been scanned and the device has recognized the item.
5. Unidentified feature
The barcode for the feature has not been scanned. In WeldEye cloud service, you can select
which features are always shown on the display. See
page 24.
6. Menu
Select Menu to go to other views and settings.
OPERATING MANUAL | EN
on page 20.
Identifiers shown on Smart Reader
10
2.2 Main screen and navigation
on
©
KEMPPI | 2017-12-22