Link Smart Reader To Your Company Weldeye Account; Configure Smart Reader's Network Connection - Kemppi Smart Reader Operating Manual

Table of Contents

Advertisement

WELDEYE

3.4 Link Smart Reader to your company WeldEye account

Only WeldEye support personnel can link a Smart Reader to your WeldEye account. Contact the
support personnel and give them the serial number of the Smart Reader printed on the sticker on
the back of the device under the cover.
See
Contact information

3.5 Configure Smart Reader's network connection

Select the wireless network and enter the password in WeldEye cloud service, and transfer the
settings configuration file to Smart Reader.
Follow these steps:
In WeldEye, go to Administration view, and select Configurations.
1.
Click Add new.
2.
Fill in the information.
3.
Click Save. The settings are saved in the Configuration list.
4.
To download the settings file to your computer, check the box next to the configuration, and
5.
click Actions > Download.
Copy the downloaded file on a USB stick, and disconnect it from the computer.
6.
Connect the USB stick to Smart Reader.
7.
Smart Reader asks whether to change the network settings. Answer YES.
8.
Smart Reader now automatically connects to the network. WiFi icon on the top right corner of the
display shows the connection state:
• No icon - Smart Reader is not connected to WiFi.
• White icon - Smart Reader is connected to WiFi, but cannot communicate with the WeldEye
server.
• Green icon - Smart Reader is connected to WiFi, and WeldEye communication works.
If the icon is constantly toggling between no-icon and white-icon states, wifi reception may be
poor at that spot. Move the device closer to the WiFi access point, or install additional access
points.
If the icon is toggling between white-icon and green-icon states, wifi reception may be poor at
that spot, or there may be an error. Contact WeldEye support. See
37.
OPERATING MANUAL | EN
on page 37.
Note: Link Smart Reader to WeldEye before downloading the configuration file. The
configuration file only applies to Smart Readers that are in the Devices list at the
time of the download.
3.4 Link Smart Reader to your company WeldEye account
Contact information
20
on page
©
KEMPPI | 2017-12-22

Advertisement

Table of Contents
loading

Table of Contents