Table of Contents
Advertisement
WELDEYE
Figure 5: Connecting ARC Euro Adapter and Smart Reader to welding machine
3.2.2.3 Connect Smart Reader with ARC Universal Adapter - TIG
Connect the connection cable from Smart Reader to the adapter.
1.
Connect the adapter to a separate power supply with ARC Control Cable (required to power
2.
the Smart Reader).
Connect the adapter to the welding machine ground connector, and the Dix branch
3.
connector to the opposite pole.
OPERATING MANUAL | EN
3.2 Connect Smart Reader to the welding machine
17
©
KEMPPI | 2017-12-22
Advertisement
Table of Contents
