Collecting Welding Data; Welder's Workflow With Smart Reader - Kemppi Smart Reader Operating Manual

WELDEYE

4 Collecting welding data

Smart Reader always collects welding data when connected to the welding machine and powered
on, even if no bar codes have been scanned.

4.1 Welder's workflow with Smart Reader

Note: If your Smart Reader has a 1d scanner, make sure the light is bright enough and
the barcode lies on a flat surface so that the device is able to scan the barcode.
To associate the welder with the following welding data, log in to the Smart Reader by
1.
scanning the welder barcode.
Welder barcodes are created in the Personnel view in WeldEye cloud service.
By default, the Smart Reader user interface is in the language defined in the WiFi network
configuration file. However, the language can be set for each person separately in the
Personnel view in WeldEye.
Scan barcodes to give meaning to the welding data. If you do not have a barcode, enter the
2.
identifiers manually with the virtual keyboard by selecting Menu → Enter barcodes. The
following information types are supported:
• Welder
• WPS
• Filler material ("Wire")
• Filler material batch number ("Wire batch")
• Shielding gas ("Gas")
• Weld
OPERATING MANUAL | EN
4.1 Welder's workflow with Smart Reader
22
©
KEMPPI | 2017-12-22