Weld Data View After Welding - Kemppi Smart Reader Operating Manual

WELDEYE

4.6 Weld Data view after welding

After welding, Smart Reader can display the Weld data view, which shows the minimum and
maximum current and voltage of the last welding. The welder can adjust his parameters or
welding technique based on this feedback. If a WPS is currently identified, the parameter limits
are shown and deviating measured values are shown in red.
It is not necessary to acknowledge this screen after every weld. If several welds have been
made, only the latest is shown. The previous welds' data cannot be shown in Smart Reader; that
information is available in WeldEye cloud service.
This feature is enabled in WeldEye cloud service settings.
OPERATING MANUAL | EN 28
4.6 Weld Data view after welding
©
KEMPPI | 2017-12-22