Connect Smart Reader To Other Welding Machines - Kemppi Smart Reader Operating Manual

WELDEYE
Connect the 4-pin connector of the connection cable to the Smart Reader: align the pins,
1.
push, and turn.
Connect the 7-pin round connector of the connection cable either to the welding machine
2.
power source or to the wire feeder, whichever is more convenient for you.

3.2.2 Connect Smart Reader to other welding machines

Use an adapter for measuring voltage and current. Available adapters include:
ARC Universal Adapter - CV
Compatible with all MIG/MAG and MMA machines, and with TIG welding machines without
High frequency ignition. Connects to the power source. Rated for maximum 500 A welding
current.
ARC Euro Adapter - CV
Compatible with MIG/MAG welding machines with Euro gun connector. Connects to the wire
feeder. Rated for maximum 500 A welding current.
ARC Universal Adapter TIG
Always use this adapter with TIG welding machines with High Frequency ignition. Shielded
against the high voltage ignition spark. Rated for maximum 500 A welding current.
ARC SAW Adapter
Always use this adapter with (high-voltage) submerged arc welding machines. Compatible
with heavy automatized welding machines used for SAW/121/125 welding processes. Rated
for maximum 1600 A welding current.
For detailed information, see the user manual of each device.
Warning: Universal Adapter -CV, TIG and SAW Adapter must be installed by a licensed
electrician.
OPERATING MANUAL | EN
3.2 Connect Smart Reader to the welding machine
15
©
KEMPPI | 2017-12-22