Guided Setup; Connect Cables - Yealink W60P Quick Start Manual

Guided Setup

Connect Cables

Please follow the diagram to install your phones. Once plugged in, the phone will
Connecting the Cordless Base:
1. Open the box and remove
the Cordless Base, Power
Adapter and Ethernet cable.
2. Connect one end of the Ethernet
cable to the Internet port on
the rear of the Base Station.
3. Connect the other end of the
Ethernet cable to any free port on
your existing router or anywhere on
your existing data network.
4. Connect the Base Station Power
Adapter to the connector on the
Base Station, and then plug the
Power Adapter into a power outlet.
Attach the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
diagram t
a. AC Power Option
b. PoE (Power over Ethernet) Option
IEEE 802.3af compliant
PoE Hub/Switch
2