Section 2: Specifications; Emission Information; Emissions Data Plate - Generac Power Systems Protector Series Owner's Manual

Section 2: Specifications

Emission Information

The U.S. Environmental Protection Agency (EPA)
requires that the generator comply with exhaust emission
standards. The generator is certified to meet the
applicable EPA emission levels, and is certified for use as
a stationary engine for standby power generation. Any
other use may be a violation of federal and/or local laws.
To ensure that the engine complies with the applicable
emission standards for the duration of the engine's life, it
is important to follow the maintenance specifications in
Section 5. This generator is certified to operate on Ultra-
Low Sulfur Diesel Fuel No. 2 (KSM2610).
Figure 2-1. Emissions Data Plate on Cylinder Head Cover (Sample)
Owner's Manual for Stationary Diesel Generators

Emissions Data Plate

A data plate is riveted to the cylinder head cover to verify
compliance with EPA emissions regulations.
Specifications
006367
5