Arbitrary Setting; Save Lut; Color Matrix Conversion; 3 × 3 Filter - Sony XCL-S600 Technical Manual

Arbitrary setting

The output values 0 through 4095 that correspond to
input values 0 through 4095 can be changed.
command param1
LUT 0 to 4095
Setting example:
>LUT 0 3
>LUT 1 10
>LUT 2 20
...
>LUT 4094 4000
>LUT 4095 4010
>LUT-FORMAT 3

Save LUT

When you change the settings, save them using the LUT-
SAVE command.
command
LUT-SAVE

Color Matrix Conversion

During RGB output, the following color matrix
conversion can be applied to the color model. Specify
using values between -8191 and 8191. 256 is ×1.
command param
CR-TF 0
1
command param1
CR-TF-VAL 00
01
02
10
11
12
20
21
22
32
Color Matrix Conversion
param2
0 to 4095
Setting
Conversion off
Conversion on
param2 Setting
-8191 to 256 to 8191 Gain00
-8191 to 0 to 8191 Gain01
-8191 to 0 to 8191 Gain02
-8191 to 0 to 8191 Gain10
-8191 to 256 to 8191 Gain11
-8191 to 0 to 8191 Gain12
-8191 to 0 to 8191 Gain20
-8191 to 0 to 8191 Gain21
-8191 to 256 to 8191 Gain22
3 × 3 filter
The nine filter parameters can be set from -8191 to 8191.
The parameter 256 is ×1.
Depending on the patterns of parameters, you can
reduce noise, apply edge enhancement and extract the
contour.
3 × 3 filter
Monochrome model and color model apply a 3 × 3 area
filter for RAW output. The brightness of the central pixel
and the eight pixels around it, and the parameter of each
pixel are multiplied and added together, The result is the
brightness of the central pixels. Specify using values
between -8191 and 8191. The parameter 256 is ×1.
command param
SP-FL 0
1
command param1
SP-FL-VAL 00 -8191 ~ 8191
01 -8191 ~ 8191
02 -8191 ~ 8191
10 -8191 ~ 8191
11 -8191 ~ 8191
12 -8191 ~ 8191
20 -8191 ~ 8191
21 -8191 ~ 8191
22 -8191 ~ 8191

Test Chart Output

For monochrome model, monochrome chart can be set.
For color model, monochrome chart or color chart can
be set.
Setting
filter off
filter on
param2 Setting
Parameter for the
upper left pixel
Parameter for the
upper pixel
Parameter for the
upper right pixel
Parameter for the
left pixel
Parameter for the
central pixel
Parameter for the
right pixel
Parameter for the
lower left pixel
Parameter for the
lower pixel
Parameter for the
lower right pixel