Download  Print this page

Gpio Connector - Sony XCL-S600 Technical Manual

Digital video camera module.
Hide thumbs

Advertisement

2.0µs or less
Note
When inputting a trigger signal to the camera using the DC-700, use DC 5 V or less at the logical high level.
Digital IF connector specifications

GPIO Connector

The DC IN connector's 10th and 11th pins are for the GPI connector, the 6th and 9th pins are for the GPO (+) connector,
the 4th and 7th pins are for the GPIO switching connector. The trigger reset connector is the DC IN connector 11th pin.
If you are connecting an external device to each connector, refer to the circuit specifications below.
GPI circuit specifications
GPO circuit specifications
14
GPIO Connector
2.0µs or less
10µs to 2s
100µs or more
Trigger input polarity = Positive
As GPO1
0.30 to 0.40v
0.30 to 0.40v
1.125 to 1.375v
DC IN connector
DC IN connector
2 to 24V
0 to 0.4V
GND

Advertisement

Table of Contents

   Related Manuals for Sony XCL-S600

This manual is also suitable for:

Xcl-s900Xcl-s600cXcl-s900c

Comments to this Manuals

Symbols: 0
Latest comments: