Esc T N - Epson TM-L60 Operator's Manual

[Description] The pulse defined by nl and n2 is output on connector pin m.
m is specified as follows:
l
ON time is nl X 2 ms and OFF time is n2 X 2 ms.
l
The circuit on the user side should be designed so that the
l
drawer drive duty is as shown below.
It is recommended that n2 be four times as much as nl or more.
If m is out of range, the printer reads n1 and n2 but does not
[Notes]
l
output a pulse.
[Default] Neither m, n1, nor n2 is defined.

ESC t n

Select character code table
[Name]
[Format] <1B>H<74>H<n>
[Range]
[Description] Selects page n from the character code table.
[Default] n = 0
[Reference] APPENDIX D Character Code Tables
ESC u n
Transmit printer status
[Name]
<1B>H<75>H<n>
[Format]
[Range] n = 0
[Description] Transmit the current status of connector pin.
n is specified as follows:
l
m
Connector pin
0 Drawer kick-out connector pin 2
1 Drawer kick-out connector pin 5
ON time
(ON time + OFF time)
Connector pin
n
0 Drawer kick-out connector pin 3
40