Table of Contents
Advertisement
Each bit of n is used as follows:
l
[Notes]
l
state due to printer operation.
[Default]
n = 1
ESC @
Initialize printer
[Name]
<1B>H<40>H
[Format]
[Description]
Clears the data in the print buffer and resets the printer mode (to
the same state as when the power is turned on).
[Note]
The DIP switches are not read again.
l
The data in the receive buffer is not cleared.
l
l
command is not cleared.
ESC D [n]kNUL
[Name]
Set horizontal tab positions
[Format]
<1B>H<44>H[<n>]k<00>H
[Range]
1
0
[Description]
Sets horizontal tab positions.
l
l
B i t
D e v i c e
0
Printer
Undefined
1
Undefined
2
Undefined
3
Undefined
4
Undefined
5
U n d e f i n e d
6
Undefined
7
Even when the printer is not selected, it may enter the BUSY
Adjustment amount of the label starting position using < GS A >
n
255
k
32
"n" specifies the column number from beginning of the line for
setting a horizontal tab position.
[n= (Column number) - 1]. For example, when a tab is to be set
at column 9, n = 8.
"k" indicates the total number of horizontal tab positions to be
Set.
Value
0
Invalid
33
1
V a l i d
Hide quick links:
Advertisement
Table of Contents
