Esc Sp N - Epson TM-L60 Operator's Manual

LF
Print and line feed
[Name]
<OA> H
[Format]
[Description] Prints the data in the print buffer and performs 1 line feed based
on the current line spacing.
Sets the print starting position to the beginning of the line.
l
[Reference] ESC 2, ESC 3, 5-3 Miscellaneous Notes
FF
Print and position label to start printing
[Name]
<OC> H
[Format]
[Description] Prints the data in the print buffer and positions the next label for
printing.
This command is effective only when label printing mode is se-
[Notes]
l
l
l
[Reference] GS FF

ESC SP n

Set character right-side spacing
[Name]
<1B> H <20> H <n>
[Format]
[Range] 0
[Description] Sets the character right-side spacing in dot units (1/180 inch units).
The character right-side spacing for double-width mode is twice
[Notes]
l
the set value.
[Default]
n =
ESC ! n
[Name] Set print mode
<1B> H <21> H <n>
[Format]
[Range] 0
[Description] Sets a print mode.
lected.
This command will not work correctly after a label has been
moved manually using the paper feed knob. Position the label
using the paper feed switch or issue GS <.
A FF or GS FF command must be sent after transmitting print
data for one label.
n 32
0
n 255
27