Esc C 5 N; Esc D N - Epson TM-L60 Operator's Manual

l
[Notes]
l
l
n = 0
[Default]

ESC c 5 n

Enable/disable panel switches
[Name]
<1B>H<63>H<35>H<n>
[Format]
[Range]
[Description] Enables or disables the paper-feed switch.
l
[Notes]
l
n = 0
[Default]

ESC d n

Print and feed paper n lines
[Name]
<1B>H<64>H<n>
[Format]
[Range]
Prints the data in the print buffer and performs n lines feeds.
[Description]
l
l
[Default] Not defined.
5-3 Miscellaneous Notes
[Reference]
ESC p m n1 n2
[Name] Generate pulse
<1B>H<70>H<m><n1><n2>
[Format]
m = O , 1
[Range]
In the TM-L60, only the journal near-end detector can be se-
lected and only the lowest bit of n is valid.
When a paper-end is detected by the journal detector, the
printer goes OFF-LINE after printing stops.
If a paper-end is detected by paper detectors when thermal label
paper is selected, the printer goes OFF-LINE after printing data
for one label.
Only the lowest bit of n is valid.
When n = <* * * * * * * 0>B, the paper feed switch is enabled.
When n = < * * * * * * * 1>B, the paper feed switch is disabled.
If the panel switches are disabled by this command, the paper
feed switch is disabled. Therefore, paper cannot be fed with the
paper feed switch.
Sets the print starting position to the beginning of the line.
The predetermined line spacing remains unchanged.
39