The Cover-Open Detector; Removing Jammed Paper - Epson TM-L60 Operator's Manual

Thermal line printer
Hide thumbs Also See for TM-L60:
Table of Contents

Advertisement

5-6 The Cover-open Detector

n n The cover-open detector
This unit has an cover-open detector located inside the roll-paper cover.
Data is not printed when the printer cover is open.
l
Opening the cover sets the printer OFF-LINE; data cannot be received when the
l
printer is OFF-LINE.
Paper cannot be fed with the paper-feed switch when the roll-paper cover is
l
open.
Closing the cover sets the printer ON-LINE automatically.
l
NOTE:
The roll-paper cover cannot be closed unless the head-release lever and the
head-open lever are down.

5-7 Removing Jammed Paper

Remove jammed paper according to the following steps.
Open the roll-paper cover and raise the head-open lever.
CAUTION:
The print head is very hot immediately after printing.
l
Always remove jammed paper after the print head has cooled.
Or remove the screw
Remove any jammed paper.
Push the head-open lever down. Reload roll paper and close the roll-paper
cover. See 3-1 to .
and take the paper entrance away, instead of step .
24

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents