Appendix B Connectors - Epson TM-L60 Operator's Manual

APPENDIX B Connectors

1. Connectors
Power
2. Interface connectors
See APPENDIX C Interfaces
3. Power supply connector
This connector is used to connect an external power source.
Pin assignment:
1)
2) Model: User side:
Printer side: TCS7960-53-2010 (Hoshiden or equivalent)
NOTE: Start the external power supply after connecting the external power
supply.
4. Drawer kick-out connector (Modular connector)
1) Pin assignment:
Table B-l. Drawer Kick-out Connector Pin Assignment
Pin Number Signal Name
1
2
L1 (-)
Serial Interface Connector
Supply Connector
Pin
1:
Pin 2:
Pin 3:
SHELL:
Connector:
Cable:
Printer side connector:
User-side plug:
Sender
-
FG
Printer
Drawer Kick-out
VDC
+24
GND
Unconnected
Connected to the frame ground (FG) at the
printer side.
TCP8927-63-1110
(Hoshiden or equivalent)
2-core shielded (AWG22 X 2)
TM5RJ3-66 (HIROSE) or
equivalent
Standard 6-pin modular jack
(R11 Telephone jack)
Connected to:
Cash drawer Frame ground
Cash drawer Drawer kick-out drive signal
L1.
65
Connector
2
3
Function
S H E L L
1