Table of Contents
Advertisement
ESC ¥ n1 n2
[Name]
Set relative position
[Format]
<1B>H<5C>H<nl><n2>
[Range]
0
0
[Description]
Moves the print starting position to the specified number of dots
(1/180 inch units) from the current position.
A positive number specifies movement to the right, and a
l
negative number specifies movement to the left.
Negative numbers are specified using the supplement of N:
l
-N = 65536 - N
Divide the number of dots by 256. The integer answer is n2 and
l
the remainder is nl.
[Notes]
Any specification exceeding the printable area will be ignored.
l
[Default]
Not defined
[Reference]
ESC $
ESC - n
[Name
Turn underline mode on/off
[Format]
<1B>H<2D>H<n>
O
[Range]
[Description]
Turns underline mode on/off.
. When n = 0, underline mode is turned off.
When n = 1, underline mode (1 -dot line thickness) is selected.
l
When n = 2, underline mode (2-dot line thickness) is selected.
l
[Notes]
Underlines can be printed for all characters, but not for the
l
space skipped by an HT.
Underlines cannot be printed for 90° cw rotated characters.
l
[Default]
ESC !
ESC a n
[Name]
Align positions
[Format]
<1B>H<61>H<n>
[Range]
[Description]
Aligns all the data in one line to the specified position.
n1
255
n2
255
n
2
37
Hide quick links:
Advertisement
Table of Contents
