Choosing A Place For The Printer; Removing The Protective Material - Epson TM-L60 Operator's Manual

1-2 Choosing a Place for the Printer

n Avoid locations that are subject to direct sunlight or excessive heat (near
heaters).
n Avoid using or storing the printer in places subject to excessive temperatures
or moisture.
n Do not use or store the printer in a dusty or dirty location.
n When setting up the printer, choose a stable, horizontal location.
Intense vibration or shock may damage the printer.
n Ensure the printer has enough space to be used easily.

1-3 Removing the Protective Material

An orange plastic spacer is put into the printing mechanism section to protect the
printer from damage during transportation. Before you turn on the printer, be sure
to remove the spacer according to the following steps.
1. Open the printer cover.
2. Raise the head-open lever to remove the spacer.
3. Store it in the hollow space. Reinsert the spacer when transporting.
4. Lower the head-open lever.
Head-open Lever
Protective Material
3