Danfoss MCB 152 Operating Instructions Manual page 10

Safety
2.4.1 Validation of Performance Level
2 2
Ensure that the required performance level, determined in
the risk assessment, is achieved by the selected system for
each safety function used.
•
Validate the performance level using the SISTEMA
SW Tool of IFA (Institute for Occupational Safety
& Health).
•
Use the Danfoss SISTEMA library for the
calculation. For information about the SISTEMA
library, see www.danfoss.com/BusinessAreas/Drives-
Solutions/SISTEMA/SISTEMA.htm.
•
Contact Danfoss for support in validating the
performance level.
When using other methods for validating the performance
level, use the characteristic safety values specified in
chapter 10.5 Safety Characteristic Data.
8
Safety Option MCB 152
Danfoss A/S © 10/2014 All rights reserved. MG37F102