Set up your device
How to insert Micro-SIM card and
connect the battery
1. Unscrew 4 screws counterclockwise.
2. Remove the cover.
3. Insert Micro-SIM card as shown with PIN request disabled or
read our
Wiki
how to enter it later with
Configurator. Make sure that Micro-SIM card cut-off corner is
pointing forward to slot.
4. Connect the battery as shown to device.
5. Attach device cover back and screw in all screws.
6. Device is ready to be used.
Teltonika
4
Figure 5 Unscrew screws
Figure 4 Micro-SIM card insert
Figure 2 Attaching cover back
Figure 6 Cover removal
Figure 3 Battery connection
Figure 7 Device is ready
TMT250 | Wiki