Connecting Ht818; Scenario 1: Connecting The Ht818 Using Wan Port; Scenario 2: Connecting The Ht818 Using Lan Port; Table 3: Definition Of The Ht818 Connectors - Grandstream Networks HT818 User Manual

Phone 1- 8 (HT818)
WAN
LAN
DC Power
Reset

Connecting HT818

The HT818 is designed for easy configuration and easy installation, to connect your HT818, please follow
the steps below:

Scenario 1: Connecting the HT818 using WAN Port

When connecting HT818 using the WAN port, it will act as simple DHCP Client.
1. Insert a standard RJ11 telephone cable into the p hone ports and connect the other end of the
telephone cable to a standard touch-tone analog telephone.
2. Connect the WAN port of the HT818 to a router, switch or modem using an Ethernet cable.
3. Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect
the technical specifications of the power adapter used.
4. Power, WAN and Phone LEDs will be solidly lit when the HT818 is ready for use.

Scenario 2: Connecting the HT818 using LAN Port

When connecting the HT818 using the LAN port, it will act as a router and DHCP serving addresses, the
devices connected with HT818 LAN will pull DHCP addresses from your HT818.
Insert a standard RJ11 telephone cable into the p hone ports and connect the other end of the
1.
telephone cable to a standard touch-tone analog telephone.
Connect a computer or switch to the LAN port of the HT818 using an Ethernet Cable.
2.
Insert the power adapter into the HT818 and connect it to a wall outlet and make sure to respect
3.
the technical specifications of the power adapter used.
4. Power, LAN and Phone LEDs will be solidly lit when the HT818 is ready for use.
Note: Please make sure to enable NAT Router under Web GUI → Basic Settings →Device Mode.

Table 3: Definition of the HT818 Connectors

Connects the analog phones / fax machines to the phone adapter using
an RJ-11 telephone cable.
Connects the phone adapter to your router, switch or modem using an
Ethernet RJ45 network cable.
co
Connects the phone adapter to your PC or switch using an Ethernet RJ45
network cable.
Connects the phone adapter to PSU (12V – 1.5A).
Factory reset button. Press for 7 seconds to reset factory default settings.
HT818 User Guide
Version 1.0.10.6
P a g e |
15