Wayne EH User Manual page 28

1. Identify which E burner model you have and set the gun depth accordingly.
2. To position the gun assembly forward or backwards, loosen the gun assembly 3/8-24 hex lock nut with a 9/16
inch wrench and the 5/16 inch hex slotted slot cover screw as shown in Figure 18.
Arrow
Decal
5/16 inch
Hex slotted screw
3. Once in the required position per
move and align arrow decal with slot plate cover.
buss bars. Take care not to pinch the ignition transformer lead wires between the housing and cover plate. Reinstall
the igniter plate hold down clip and tighten the 5/16-18 hex slotted screw securely.
Figure 17– EHASR Gun Depth Settings
Figure 18– Oil Gun Depth Adjustment
Figure 16
and
Close the ignition transformer and assure there is a positive spring contact with the brass
Figure 17
, retighten the hex lock nut and slot cover screw,
28
3/8-24
Hex lock nut