Attaching Drive Speed Control Lever - Yardworks 270-3250 Owner's Manual

NOTE: For easiest a ssembly, w e recommend not attachingthelower bolt of eachhandle
bracketuntil after assembling the chuterotationhandle,augeranddrive handlecables,
anddrive speed controllever.
Figure 2- Handle Assembly
Attaching Drive Speed Control Lever
To attach the drive speed control lever, slide it through the drive speed selection hole in
the handle and attach it at the base of the snow thrower using two bolts and two nuts as
shown in figure 3. Do not worry about the position of the handle in the drive speed
selection hole. It will naturally be correct.
b
Figure 3- Drive Speed Control Lever Attachment
10