Sd Card Connector; Can - Atmel SAM4E Xplained Pro User Manual

SAM4E pin
PD2
PD3
PD4
PD5
PD6
PD7
PD8
PD9
PD10
PD11
PD12
PD13
PD14
PD15
PD16
PD29
PD31
4.2.4.

SD Card Connector

The SAM4E Xplained Pro kit has one SD card connector which is connected to High Speed Multimedia
Card Interface (HSMCI) of the SAM4E
Table 4-9 SD Card Connections
Table 4-9 SD Card Connections
SAM4E pin
PA30
PA31
PA26
PA27
PA29
PA28
4.2.5.

CAN

The SAM4E Xplained Pro kit has CAN1 connected to the an Infineon TLE7250GVIOXUMA1 high speed
CAN transceiver.
Table 4-10 CAN Connections
Function Ethernet function
GTX0 TXD0
GTX1 TXD1
GRXDV RXDV/CONFIG2
GRX0 RXD0/DUPLEX
GRX1 RXD1/PHYAD2
GRXER RXER/ISO
GMDC MDC
GMDIO MDIO
GCRS CRS/CONFIG1
GRX2 RXD2/PHYAD1
GRX3 RXD3/PHYAD0
GCOL COL/CONFIG0
GRXCK RXC/B-CAST_OFF
GTX2 TXD2
GTX3 TXD3
GPIO INTRP/
#NAND_TREE
GPIO #RST
on page 21 lists all I/O-lines connected to the SD card connector.
Function SD card function
MCDA0 DAT0
MCDA1 DAT1
MCDA2 DAT2
MCDA3 DAT3
MCCK CLK
MCCDA CMD
on page 22 lists the I/O-lines connected to the CAN transceiver.
Shared functionality
EXT2 GPIO
Shared functionality
Atmel SAM4E Xplained Pro [USER GUIDE]
Atmel-42216B-SAM4E-Xplained-Pro_User Guide-09/2015
21