Table of Contents
Advertisement
Quick Links
SMART ARM-based Microcontrollers
SAM D11 Xplained Pro
USER GUIDE
Preface
®
The Atmel
SAM D11 Xplained Pro evaluation kit is a hardware platform to
evaluate the ATSAMD11D14A microcontroller.
Supported by the Atmel Studio integrated development platform, the kit
provides easy access to the features of the Atmel ATSAMD11D14A and
explains how to integrate the device in a custom design.
The Xplained Pro MCU series evaluation kits include an on-board
Embedded Debugger, and no external tools are necessary to program or
debug the ATSAMD11D14A.
The Xplained Pro extension kits offers additional peripherals to extend the
features of the board and ease the development of custom designs.
Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016
Advertisement
Table of Contents
Related Manuals for Atmel SAM D11 Xplained Pro
Summary of Contents for Atmel SAM D11 Xplained Pro
-
Page 1: Preface
Preface ® The Atmel SAM D11 Xplained Pro evaluation kit is a hardware platform to evaluate the ATSAMD11D14A microcontroller. Supported by the Atmel Studio integrated development platform, the kit provides easy access to the features of the Atmel ATSAMD11D14A and explains how to integrate the device in a custom design. -
Page 2: Table Of Contents
Connecting a SAM-ICE to an Xplained Pro Board..............18 6. Hardware Revision and Known Issues..............20 6.1. Identifying Product ID and Revision................... 20 6.2. Revision 3...........................20 7. Document Revision History..................21 8. Evaluation Board/Kit Important Notice..............22 Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016... -
Page 3: Introduction
1.2. Kit Overview The Atmel SAM D11 Xplained Pro evaluation kit is a hardware platform to evaluate the Atmel ATSAMD11D14A. The kit offers a set of features that enables the ATSAMD11D14A user to get started using the ATSAMD11D14A peripherals right away and to get an understanding of how to integrate the device in their own design. - Page 4 Figure 1-1. SAM D11 Xplained Pro Evaluation Kit Overview Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016...
-
Page 5: Getting Started
, Windows 7, Windows 8, Windows 10, and Windows Server 2012. Once the Xplained Pro MCU board is powered the green power LED will be lit and Atmel Studio will auto detect which Xplained Pro MCU- and extension board(s) are connected. Atmel Studio will present relevant information like datasheets and kit documentation. - Page 6 3D plots, layer plots etc. • Hardware Users Guide in PDF format - PDF version of this User Guide. • SAM D11 Xplained Pro on Atmel web page - Atmel website link. Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016...
-
Page 7: Xplained Pro
Atmel Data Visualizer is used to send and receive data through DGI. The EDBG controls two LEDs on SAM D11 Xplained Pro; a power LED and a status LED. The table below shows how the LEDs are controlled in different operation modes. -
Page 8: Hardware Identification System
Maximum Current [mA] uint16_t 3.3. Power Sources The SAM D11 Xplained Pro kit can be powered by several power sources as listed in the table below. Table 3-3. Power Sources for SAM D11 Xplained Pro Power input Voltage requirements Current requirements... -
Page 9: Xplained Pro Headers And Connectors
C interface. Always implemented, bus type. C_SCL Clock line for I C interface. Always implemented, bus type. UART_RX Receiver line of target device UART UART_TX Transmitter line of target device UART Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016... -
Page 10: Xplained Pro Power Header
Xplained Pro Power Header The power header can be used to connect external power to the SAM D11 Xplained Pro kit. The kit will automatically detect and switch to any external power if supplied. The power header can also be used as supply for external peripherals or extension boards. -
Page 11: Hardware Users Guide
Xplained Pro Standard Extension Header The SAM D11 Xplained Pro header EXT1 offers access to the I/O of the microcontroller in order to expand the board e.g. by connecting extensions to the board. This header is based on the standard extension header specified in Table 3-4 Xplained Pro Standard Extension... -
Page 12: Current Measurement Header
RESET PA14 4.2.3. There is one yellow LED available on the SAM D11 Xplained Pro board that can be turned on and off. The LED can be activated by driving the connected I/O line to GND. Table 4-4. LED Connections Pin on SAM D11... -
Page 13: Usb
4.2.5. The SAM D11 Xplained Pro has a Micro-USB connector for use with the SAM D11 USB module. To be able to detect when a target USB cable is connected in self-powered mode, a GPIO is used to detect the VBUS voltage on the connector. -
Page 14: Virtual Com Port
Atmel Data Gateway Interface The Embedded Debugger features an Atmel Data Gateway Interface (DGI) by using either a SPI or I²C port. The DGI can be used to send a variety of data from the SAM D11 to the host PC. For further... -
Page 15: Appendix
Select System (default) as the reset method. In the category Debugger > CMSIS DAP, select the JTAG/SWD tab. Select SWD as the interface and optionally select the SWD speed. Figure 5-1. Select Target Device Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016... - Page 16 Figure 5-2. Select Debugger Figure 5-3. Configure Flash Loader Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016...
- Page 17 Figure 5-4. Configure Reset Figure 5-5. Configure Interface Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016...
-
Page 18: Connecting A Sam-Ice To An Xplained Pro Board
Cortex Debug Connector. You can connect the SAM-ICE to the debug connector on an Xplained Pro using either an Atmel-ICE adapter, SAM-ICE adapter, or a 10-pin 50-mil header to squid cable. When using a squid cable, see the table and figures below for how to connect the SAM-ICE to the Xplained Pro board. - Page 19 USB. Physically removing the connection between the EDBG and the debug header by removing 0Ω resistors, where available, or cutting the tracks to the EDBG can also be done. Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016...
-
Page 20: Hardware Revision And Known Issues
6.1. Identifying Product ID and Revision The revision and product identifier of Xplained Pro boards can be found in two ways; either through Atmel Studio or by looking at the sticker on the bottom side of the PCB. By connecting an Xplained Pro MCU board to a computer with Atmel Studio running, an information window will pop up. -
Page 21: Document Revision History
Document Revision History Doc. rev. Date Comment 42349B 04/2016 Added Getting Started with IAR 42349A 01/2015 Initial document release Atmel SAM D11 Xplained Pro [USER GUIDE] Atmel-42349B-SAM-D11-Xplained-Pro_User Guide-04/2016... -
Page 22: Evaluation Board/Kit Important Notice
(WEEE), FCC, CE or UL (except as may be otherwise noted on the board/kit). Atmel supplied this board/kit "AS IS", without any warranties, with all faults, at the buyer's and further users' sole risk. The user assumes all responsibility and liability for proper and safe handling of the goods. - Page 23 DISCLAIMER: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND...
- Page 24 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microchip ATSAMD11-XPRO...
Need help?
Do you have a question about the SAM D11 Xplained Pro and is the answer not in the manual?
Questions and answers