Dismantling And Assembling The Shuttle Race; To Assemble The Shuttle Race - Kenmore 385.12102 Owner's Manual

Dismantling and Assembling the Shuttle Race
NOTE: Turn off the power switch or unplug the machine.
(_) Bobbin case
(_) Levers
1_) Shuttle race cover
1_ Shuttle
_) Shuttle race
Raise the needle to its highest position and open the hook
cover. Open the hinged latch of the bobbin case and take it
out of the machine° Open the shuttle race ring holders and
remove the shuttle race ring,,
Remove the shuttle,,
* Clean the shuttle race with a brush and soft dry cloth°
To Assemble the Shuttle Race
(_) Pin
0 Notch
Hold the shuttle by the center pin and carefully fit it back into
the shuttle race, forming a perfect circle with the shuttle
driver. Attach the shuttle race ring making sure the bottom
pin fits into the notch° Lock the shuttle race ring by turning
the holders back into position,, Insert the bobbin case.
54