Download Print this page
Advantech ASMB-823I Startup Manual

Advantech ASMB-823I Startup Manual

Intel xeon e5-2600v3 series atx server board with ddr4, 4 pcie x16, 6 usb 3.0, 9 sata3
Hide thumbs Also See for ASMB-823I:

Advertisement

Quick Links

ASMB-823I Intel Xeon® E5-2600v3 Series ATX Server
Board with DDR4, 4 PCIe x16, 6 USB 3.0, 9 SATA3
Startup Manual
Packing List
Before you begin installing your card, please make sure that
the following items have been shipped:
• 1 ASMB-823I Startup Manual
• 1 Driver CD (user's manual is included)
• 2 Serial ATA HDD data cables
• 2 Serial ATA HDD power cables
• 2 CPU power cables (8P)
• 1 I/O port bracket
• 1 Warranty card
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note 1:
Acrobat Reader is required to view any PDF file.
Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the ASMB-823I series Rev. A1
Part No. 2006823I10
Print in China
Standard M/B Functions
• CPU: Dual LGA2011-R3 Intel Xeon® E5-2600v3 series
• BIOS: AMI 128 Mb SPI BIOS
• Chipset: Intel® C612 PCH
• System Memory: 6* DDR4-1600/1866/2133 Registered
Note 2:
• SATA Interface: 9 SATA3 6 Gb/s ports Intel Rapid
• Serial Ports: One onboard header, only support RS-232
• Keyboard/Mouse Header (KBMS2): Supports the stan-
• Watchdog Timer: 255 level timer intervals
• USB Port: Supports up to 6 USB 3.0 ports (2 ports from
VGA Interface
• Chipset: Aspeed AST2400/1400
• Display Memory: 64 MB
• Resolution: Supports VGA up to resolution 1920 x 1200
Ethernet Interface
• Interface: 10/100/1000 Mbps
• Controller: LAN1: Intel I210; LAN2: Intel I210
Mechanical and Environment
• Dimensions (L x W): 244 x 304 mm (9.6" x 12")
• Power Supply Voltage: +3.3 V, +5 V, ±12 V, +5 Vsb
• Power Consumption (mainboard only, excluding IO
device): Max. load: +3.3 V @ 1.67 A, +5 V@ 0.85 A, +12 V
@ 18.11 A,+5 Vsb@ 0.05 A, -12 V@ 0.004 A
• Operating Temperature: 0 ~ 40° C (depending on CPU)
• Weight: 1 kg (weight of board)
1st Edition
October 2014
Specifications
ECC DIMM, Max. Capacity 192 GB
Due to the inherent limitations of the PC archi-
tecture, the system may not fully detect 192 GB
RAM when 192 GB RAM is installed.
Storage (for Windows only) (SATA0-SATA4 and sSATA0-
sSATA3 Supports software RAID 0, 1, 10 & 5)
dard PS/2 keyboard and mouse via PS/2 cable
onboard 20-pin header) and 3 USB 2.0 ports (1*Type-A, 2
ports from onboard 10-pin header)
@ 60 Hz refresh rate
ASMB-823I Startup Manual 1

Advertisement

loading

Summary of Contents for Advantech ASMB-823I

  • Page 1 For technical support and service, please visit our support website at: http://support.advantech.com This manual is for the ASMB-823I series Rev. A1 Part No. 2006823I10 1st Edition Print in China October 2014 ASMB-823I Startup Manual 1...
  • Page 2 System LED connector Pin.9 #RST_SW Pin.12 SMBUS1 SMBus header Pin.8, Pin.11 HWM_SMB_DATA, HWM_SMB_CLK BMC1, BMC2 IPMI module header *Power button pin is located in Pin 3 & 6 of front panel SGPIO1, SGPIO2 SATA SGPIO header connector 2 ASMB-823I Startup Manual...
  • Page 3 DIMMA2 JFP2 DIMMB1 JPF3 JCASE1 JTHR_SEL1 & JME1 SLOT12V1 ATX12V1 GPIO1 LANLED1 FAN0 FAN0 FAN1 JCMOS1 sSATA1 SMBUS1 VOLT1 BIOS1 SGPIO1 & 2 SYS FAN2 SP1_CN1 USB2_3 EX_THR1 Figure 1: Board Layout: Jumper and Connector Locations ASMB-823I Startup Manual 3...

This manual is also suitable for:

E5-2600v3 series