Shelves And Storage Drawers; Removable Door Bins; Dividers; Storage Bin - Kenmore Refrigerator Owner's Manual

Shelves and Storage Drawers
Adjustable Shelves
Shelves in the fresh food and freezer compartments
are adjustable, enabling you to make efficient shelf
arrangements
To remove a shelf:
Tilt the shelf up at front, then
lift it up and out of the tracks
on the rear wall of the
refrigerator.
To replace a shelf:
Select desired shelf heighL
With the shelf front raised
slightly, engage the top lugs
in the tracks atthe rear of the
cabinet Then lower the front
of the shelf until it locks
into position.
, if up
_ancl 0u__
mEogage .Jl l HI. [iI
J ock nto place _1_ j
Wire shelves (on some models)
are adjustable in the same manner.
Door Shelves (onsomemodels)
Shelves on both dgors keep frequently-used items
within easy reach
Removable Door Bins
ion some models)
Adjustable bins on fresh food
and freezer compartment
doors can easily be carried
from the refrigerator to the
work area
To remove: Slide bin forward on molded supports until it
comes completely out of the door
To relocate: Select desired shelf height, engage bins in
the molded supports of the door, and slide in.L Bin will
hook in place..
Dividers are designed to give
you storage flexibility in
removable bins and on your
fresh food door shelves. Items
such as salad dressings, steak
sauces and other condiments
can now be kept securely against the door liner to help
prevent tipping, spilling or sliding
Place index finger and middle finger on either side of the
divider near the front and simply move it back and forth
to fit your needs
Storage Bin (on somemodels)
This removable tilt-out bin can
be located on the fresh food
or freezer compartment door.
It has been designed for
convenient storage of those
frequently-used items that do
not fit easily into a door bin
or soomtoobe_used items that
require covered storage to
keep from drying out
_--P_._ _]Push up
To open, push the latch up and pull the bin handle
forward
To avoid damaging the refrigerator, make sure
the bin is closed and latched before closing the
refrigerator door..
To remove the bin, lift up and out of the bin housing..
To relocate the Storage Bin unit, lift the bin housing up
and out of the molded supports on the door, move it to
the desired new location, and lower it onto the molded
supports on the door. You do not have to remove the bin
from the housing when relocating the Storage Bin unit
6