Allen-Bradley ControlLogix 5570 Reference Manual page 91

e. The Save Imported Project As dialog opens.
The import process must create a project file - you must specify the
name, location and revision of the project file to create.
f. Click Import to open the project file.
Once the project file is opened, the Controller Organizer appears,
and shows everything in the controller as of the time when the
project file was last saved.
IMPORTANT If you import an .L5K or .L5X file that contains Serial Port, DF1, or
Rockwell Automation Publication 1756-RM100F-EN-P - October 2018
Replacement Considerations with Safety Applications
ASCII elements into a project that uses a controller with no serial
ports results in an import error. The import then continues to
completion.
Chapter 4
91