Allen-Bradley ControlLogix 5570 Reference Manual page 62

Chapter 3 Replacement Considerations with CompactLogix and Compact GuardLogix Systems
5370 Controllers
62
Advanced Tab
The Advanced tab provides a way to assign the Controller Fault Handler and
Power-up Handler. You can also match a project to a specific controller by
serial number. The tab is used when the project is offline.
• Report Overflow Faults is a new parameter that lets you control Minor
Overflow fault reporting. When you create a project, the default setting
is disabled. When you import or open a legacy project, the default
setting is enabled. For more information, see
on page 128.
• System Overhead Time Slice is no longer required for 5380 controllers,
and the parameter is removed.
Figure 9 - Controller Properties Dialog Box - Advanced Tab
Rockwell Automation Publication 1756-RM100F-EN-P - October 2018
Minor Fault on Overflow
5380 Controllers
Report Overflow Faults is enabled by default when
morphing a legacy project, but defaults to disabled
when creating a CompactLogix 5380 project.