Table of Contents
Advertisement
Replacement Labels
Replacement Labels
WARNING
The following labels are installed on your equipment. If these labels are removed or become unreadable,
contact SPX FLOW customer service at 1-800-252-5200 or 262-728-1900, and refer to the part numbers
below for replacement labels. See also items 65 and 66 in the parts list section starting on page 102.
Application Instructions
Apply to a clean, dry surface. Remove the backing from the label, place it in proper position, protect it with a
cover sheet and burnish it. (A soft rubber roller also may be used to press the label into place.) Apply all labels
to be readable from the front of the pump. The labels below are affixed to the pumps as shown.
Part no.:
121694+
Part no: 33-95
This label is supplied on base
packages, on the side of the
gear case.
Page 12
Waukesha Cherry-Burrell
Part no.: 33-63 (040-U3 and smaller pumps)
33-60 (045-U3 and larger pumps)
WARNING
KEEP FINGERS
OUT OF PORTS
Part no: 112446+
This label is supplied with pumps with double
mechanical seals and single mechanical flush.
It is attached to the eye bolt.
95-03103
®
Brand Universal 3 Pump
label locations-UIII
11/2018
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Universal 3 Series and is the answer not in the manual?