Paradox Digiplex User Quick Reference Manual

AC LIGHT
= AC power
ON
= Power failure
OFF
STATUS LIGHT
When Green:
= Zones closed
ON
= Zone(s) open
OFF
= Exit Delay
FLASH
When Red:
= Area(s) armed
ON
= Area(s) disarmed
OFF
= Alarm
FLASH
[ ] = Erases current data entry or reverts to the preceding step.
CLEAR
[ ] = Saves current data and exits current menu.
ENTER
1. Enter your [
ACCESS CODE
To Regular Arm: Press the [
(Arms entire area when all zones are closed)
To Force Arm:
(Arms entire area without waiting for all zones to close)
To Stay Arm:
(Arms area's perimeter only, which allows you to remain in the protected area)
To Instant Arm:
(Stay arms area, but an alarm will occur instantly if zones open, including entry
delay zones)
If you have access to more than one area, select the desired area, or press the
2.
[0] button for all areas.
User's Quick Reference Guide
DGP2-641/DGP2-641AC

HOW TO ARM

], and then...
] button.
ARM
Press the [
FORCE
Press the [ ] button.
STAY
Press the [5] button.
] button.
The LCD screen will
guide you with detailed
messages.
Use the arrow buttons to
scroll the menu or
choices.
Press the corresponding
one-touch button for 2
seconds to perform an
action without entering
your Access Code.